1000 Series Low Cure Systems are
formulated for heat sensitive substrates. Products are typically
formulated to cure at 250°F. Lower temperatures are possible.
Powder can be applied with or without minimal substrate
preheating. Products in this series will rapidly loose gloss and
chalk on exterior exposure and are best suited for interior
application. These products feature excellent physical and
chemical resistance properties. Typical uses include: medium
density fiberboard (MDF), fiber reinforced plastic (FRP), and
sheet molding compounds (SMC). Each customer’s substrate and
application technology must be evaluated before ordering powder.
2000 Series Acrylic Systems have a
broad formulating range and can meet many decorative application
requirements. Products in this series can have increased
hardness, chemical resistance, overbake resistance, and
weatherability when compared to standard systems. Products can
be formulated for interior and exterior applications. Contact a
TCI sales representative or TCI chemist to determine suitability
of this technology.
3000 Series High Temperature Systems
are formulated to provide coating stability in elevated
temperature applications. Products can be formulated for
different levels of continuous or intermittent temperature
exposure. Contact a TCI chemist to initiate a product design for
high temperature applications.
4000 Series Specialty Systems have a
broad formulating range and are utilized to meet unusually
demanding requirements of decorative and functional
applications. This series is recommended when conventional
formulas will not meet a customers performance specifications.
Contact a TCI chemist to initiate a product design for demanding
applications.
5000 Series Alternative Cure Polyester Systems
can provide solutions where TGIC or urethane polyesters are not
approved. Products in this series can be formulated to meet many
decorative requirements for gloss, smoothness, color, and
weatherability. Typical uses include: interior and exterior
furniture, sports equipment, and machinery.
6000 Series Epoxy/Polyester Hybrid Systems
have a broad formulating range and can meet many decorative and
functional application requirements. Products in this series
will rapidly lose gloss and chalk when exposed to sunlight and
are best suited for interior applications. This series has a
good balance of physical properties and excellent application
characteristics. Typical uses include: automotive accessories,
exercise equipment, power tools, and display racks.
|
|
Series Epoxy Systems have a broad
formulating range and can meet many decorative and functional
application requirements. Products in this series will rapidly
lose gloss and chalk when exposed to sunlight and are best
suited for interior applications. Epoxy systems can be
formulated to have excellent chemical resistance and physical
properties. Typical uses include: automotive underbody,
corrosion resistant primers, and material handling components.
8000 Series Urethane Systems have a
broad formulating range and can meet many decorative
requirements for gloss, smoothness, color and weatherability.
Products in the 8000 series can be formulated for use in
interior and exterior thin film applications. Most products in
this series are not suitable for high film build. Typical uses
include: lighting fixtures, automotive trim, interior automotive
components, and interior and exterior furniture.
9000 Series TGIC Polyester Systems
have a broad formulating range and can meet many decorative and
functional requirements for gloss, physical properties, chemical
resistance, color, and weatherability. Products in this series
can be used in thick film applications. Typical uses include:
aluminum extrusions, playground equipment, agricultural
equipment, and machinery.
10000 Series Superior Exterior
Performance TGIC Polyester Systems are formulated to meet the
requirements of the AAMA 2604 specification. Products in this
series have a 60° gloss range of 25-35% and are available in a
wide selection of colors. Proper chrome or non-chrome
pretreatment is critical for product performance. A chrome
conversion coating must be applied at 30 mg/ft2 minimum. The
non-chrome applied per supplier’s specification. A TCI technical
representative must audit each application system to insure
products will meet the 2604 specification.
11000 Series Highest Exterior Performance Organic Systems
are formulated to meet the requirements of the AAMA 2605
specification. Products in this series have a 60° gloss range of
25-35% and are available in many colors. Proper amorphous
chromium phosphate or amorphous chromate pretreatment is
critical for product performance. The chrome coating weight must
be applied at 40 mg/ft2 minimum. A TCI technical representative
must audit each application system to insure products will meet
the 2605 specification.
|