The Right Formulation for All of Your Coating Needs

6000 Series Epoxy/Polyester Hybrid Systems have a broad formulating range and can meet many decorative and functional application requirements. Products in this series will rapidly lose gloss and chalk when exposed to sunlight and are best suited for interior applications. This series has a good balance of physical properties and excellent application characteristics. Typical uses include: automotive accessories, exercise equipment, power tools, and display racks.
Hybrid Color Card-Click Here
Search For a Hybrid Color by Name or Number
Characteristic ASTM # # Result
Specific Gravity 1.2 to 1.9 depending on color.
Theoretical Coverage Approximately 101 to 160 ft.2 / lb. / mil.
Optimum Storage <80° F, < 50%RH
Particle Distribution +44 microns (325 mesh). Percentage varies with color.
Film Thickness D-1186 Recommended, 1 to 6 mils.
Percent Gloss @ 60° D-523-89 95+
Pencil Hardness D-3363-00 H to 4H
Adhesion D-3359-02 No lifting of 1/8" squares between scribed lines when
cross hatch adhesion is tested using the prescribed tape.
Flexibility D-522-93a A coating of 2 mils or less will withstand a bend of 180°
over a 1/8" mandrel without cracking or loss of adhesion.
Impact Resistance D-2794-93 160 inch-pounds, direct and reverse, at a film thickness of 2 mils.
Impact is influenced by film thickness and formulation.
Salt Spray Resistance B-117-97 Less than 1/16" undercoating after 1000 hours of exposure
in 5% salt spray at 95° F and 95% relative humidity.
Humidity Resistance D-2247 Greater than 1000 hours with no effect at 100° F @ 100% RH.
Chemical Resistance Hybrids have good resistance to most chemicals and solvents.
Overbake Very good.
Home | Back to Products Page